BQ F000158 Easy Go PLA, 1.75 mm, 1 kg, Transparent

1,75 mm PLA filament with Easy Go winding system The Easy Go system combines the exclusive design of our reels with one of the fastest and most innovative winding systems in the world: the fibre optic sensors define the exact position of the reel and they align it with the line of winding where the filament is wound on at one speed and with an axle movement that is calculated to the millimetre. This results in an excellent finish that allows the PLA to slide effortlessly throughout the print. PLA (polylactic acid) is the most practical material to use when venturing into 3D printing for the first time. It is easy to work with, provides excellent adherence and is specifically indicated for long lasting prints. In BQ, we make our own PLA in Huascar (Aragon). Our spools hold 100% PLA of maximum quality. This completely material is produced without the use of petroleum derivatives. PLA is generated by the polymerisation of lactic acid originating from the fermentation of vegetable-derived sugars. Unlike other materials, it does not give off unpleasant odours making it ideal for domestic use. During the printing process, each layer must have cooled sufficiently before the print head deposits another layer of melted filament on top. Given our PLA solidifies quickly it provides better print quality for small-volume pieces without sacrificing speed. Using only the typical adhesion methods like lacquer, tape or fix pads, our PLA offers excellent adherence even without a heated bed.