Solvent free epoxy resin (99% dry residue) for resin wood hulls, to recover water resistance and robustness, as prevention and care of osmosis on fiberglass hulls, for bonding any material and as extra light putty with the addition of microspheres. Apply with short pile roller and/or brush. Mix with + B (2:1) mix well, pour into a low and wide container and apply within 1/2 hour (at 20 °C). Subsequent hands should be applied 4-6 hours (at 20 °C), when the previous hand is not completely hardened. During application and cross-linking, the temperature should be between 15 °C minimum and 25 °C maximum and relative air humidity below 60%. Three four hands ensure complete water resistance of the stand. Any grouting should be done after the first hand. DILUENT: “For epoxies” (for cleaning) Yield: 12 sqm/LT N° recommended hands: 3-4 duration of mixture: 30 min. (20 °C). Catalysis ratio: A/B = 2/1 VOLUME drying: can be repainted min. 4h – max. 6h
