Brightwell Aquatics MicroBacter Clean 250ml

Shake product well before using. Mix appropriate volume of MicroBacter Clean (see below) with 250-ml (~8 fl. oz.) of aquarium water in a clean container prior to addition to the aquarium. If using a pipette to dispense MicroBacter Clean below water level of container or aquarium, be sure to thoroughly clean pipette with fresh water prior to placing tube back into MicroBacter Clean bottle; failure to do so will contaminate the product. Best results may be obtained by adding mixture to external biological filtration system. Works particularly well with Xport. Do not add to pump intake port(s). Turn protein skimming and UV-sterilization off for a period of 4 hours following addition to aquaria. While utilizing MicroBacter Clean continue good maintenance practices such as regular vacuuming, using purified water for additions, and limiting the addition of unnecessary nutrients normal cleaning and to maintain a clean aquarium: Add 20 ml (4 capfuls) per 25 US-gallons (94.6 L) [≈16 drops per gallon (3.8 L)] of aquarium water weekly problem aquariums or to rapidly accelerate cleaning: Add 30 ml (6 capfuls) per 25 US-gallons (94.6 L) [≈24 drops per gallon (3.8 L)] of aquarium water on the first day, then add Add 5 ml (1 capful) per 25 US-gallons (94.6 L) [≈4 drops per gallon (3.8 L)] of aquarium water daily for 2 weeks or longer as necessary until desired results are achieved be used in combination with Brightwell Aquatics Razor Marine. If you use the two, please use MicroBacter Clean first and then wait a few hours before adding Razor Marine. This will give the bacteria time to settle into its new environmenteria work slowly, so full results can take up to 8 to 10 weeks for long neglected systemsion: Keep out of reach of children. Not for human consumption.