Camera Barbieri NXT ULTRALIGHT TPU 700×23-32, Weight 46 Grams, Presta Valve 75 mm, Made in Italy 100%

O NOT INFLATE OUTSIDE THE COVER AT MORE THAN 0.3 BAR! TPU is an innovative thermoplastic material, it guarantees better puncture resistance, greater lightness and smoothness than ordinary butyl. The valve has a diameter of ~ 6.2 mm Compatible for tyres: 700×23, 700×25, 700×28, 700×32. COMPATIBLE WITH ALL TYPES OF BRAKES. Any traces of sealants in covers and rims do not damage the NXT camera. EN – WARNINGS: 1 – Do not inflate the inner tube out of the cover except during assembly. 2 – Do not inflate the high pressure NXT air chamber out of the tire as it can irretrievably deform and damage the inner chamber. MAXIMUM PRESSURE OUT OF THE TYRE: 0.3 BAR/ 4.5 PSI (FIG.1). You can only increase the pressure after completing the installation procedure of the NXT inner chamber. 3 – Use only with covers and rims compatible with the inner tube NXT. Use appropriate nipple cover tape or flap. 4 – DO NOT EXCEED THE PRESSURE LIMITS INDICATED FOR YOUR RIM AND COVERAGE (FIG.2). It is important to check the wheel pressure before each output. Pay attention to possible pressure increases in conditions of particularly high temperatures. 5 – The NXT inner tube conforms to the cover used. It is possible to reuse the NXT inner tube on other covers, only if of the stretched size. 6 – Air chambers are subject to wear. It is recommended to periodically check its integrity. If you notice obvious deformation or excessive wear, proceed with the replacement. 7 – Do not use sharp tools or metal levers when mounting or removing the NXT inner tube, as they may damage it. 8 – Do not try to remove the top of the valve as it may damage. The NXT inner tube valve is equipped with fixed valve, not removable and non-removable