Operation Steps:
1. Insert the capsule body and lay the body plate flat.
2. Place the frame of the arrangement plate on the base plate.
3. Place the capsules in the frame.
4. Lift the plate body and the folded wheel.
5. The capsule body falls one by one into the plate hole and then pours out the additional capsule body.
6. Take the wheel arrangement plate and put the capsule body installed on the board aside.
7. Fill power into the capsule body.
8. Scratch the board back and forth on the body when the capsule body is full of powder.
9. Use the powder press plate to fill the capsules.
10. Scrape off excess powder of the plate.
11. The cover plate and the middle plate turned over to cover the housing plate.
12. Lock the capsule body and capsule cap.
13. Remove the cover plate.
14. Remove the middle plate, pour out the capsule from the middle locking plate.
Note:
The capsules in the pictures are not included.
Specification:
Condition: 100% brand new
Element type: capsule filler
Material: plastic
Colour: blue
Number of holes: 200
Suitable for capsule type: 0 #
Size: approx. 25.5 x 19 x 7 cm / 10 x 7.5 x 2.8 inches.
Approximate weight 1418 g
Contents:
1 x Alignment Plate
1 x body plate.
1 x Medium Plate
1 x lid plate.
1 x powder press plate.
1 x power distributor.
1 x handle.