Car Hand Tool，Cylinder Honing Tool 2-6.7in Range Reliable Modified for Car 88233

After continuous debugging and testing of the original factory standard which adopts lightweight design language and special ergonomic design tool is very suitable for removing carbon deposits and hot glaze in the cylinder bore. Because the shaft is flexible which is easy to use and can be automatically centered . The knurling wheel can adjust the spring pressure of the stone on the cylinder holeure: 【FUNCTION】Cylinder honing tool, used to remove carbon deposits and hot glaze in cylinder bores, ideal for removing rust deposits in old renovations. The shaft is flexible, easy to use and self-centering. The knurled wheel can adjust the spring pressure of the stone on the cylinder hole. 【APPLICABLE】The cylinder honing tool has been continuously debugged and tested by the original factory. It is suitable for degreasing and clearing the engine cylinders with diameters from 3/4 in to 2‑1 / 2 in and from 1‑1 / 4 in to 3‑1 / 2 in. Carbon deposit and hot glaze in the holeification: Condition: 100% Brand New Item Type: Cylinder Honing Tool Material: Iron Manufacturer Part Number: 88233 Range: Approx. 50-170mm/2-6.7in Usage: Step 1. Spray lubricant on the stones or the cylinder bores. Get the hone set up on the drill. Step 2. Insert the engine hone into the cylinder and run the drill at low speed between 300-700 RPM. Move the hone up and down around once a second. Don’t push or pull the stones more than 3/4 inches out of the cylinder. Don’t run the engine hone for more than 3 mins. Step 3. After honing, use a paper towel to wipe out the inside of cylinderage List: 1 x Cylinder Honing Tool