This reverse parking sensor system is the driver’s third eye. Make driving easier and safer. The cigarette lighter powers the entire system, so installation is so simple!
Connect the camera to 12V-24V, it can be used as a full-time rearview monitor or as a security monitor. For novice drivers and large machinery operations, it is undoubtedly a good helper.
Troubleshooting:
The monitor shows a blue screen and does not show any signal?
To perform a hard reset, unplug all cables and power cords and leave them for 1 minute, then plug them in again.
Check if the connection with the camera has been established
No image on the screen?
Check if the camera is on the correct camera input
Check if the cable is connected to the monitor
Check if the camera is connected to the cable
specification:
7 inch screen
Size: 173*113MM
Video input: AV1/AV2 (AV2 reverse priority)
3 installation methods: A, desktop (please remove the protective frame outside the monitor first); B, hanging suction cups; C, comprehensive
Contrast ratio: 500:1
Voltage: 9-35V
★ Reversing camera (18 infrared lights)
Chip: CMOS 7440
Waterproof: IP68
packing list:
7-inch monitor, rear view camera, bracket, suction cup, cigarette lighter power supply, video extension cable
Applicable vehicles:
Trucks, vans, tractors, harvesters, horse boxes, horse trailers, motorhomes, station wagons, buses, caravans, vans