Specification: Model: CDD-11N Power Supply Voltage: DC12-24V Output Form & Status: NPN NO Detection Distance: 10mm Detecting Objects: Opaque objects Cylindrical Head Diameter: 18mm Line Length: 1.75m Light Source Type: Transmitting tube Induction Method: Diffuse reflection Protection Level: IP66 Housing Material: Copper nickel plating Control Output: <300mA Current Consumption: <10mA Response Frequency: 500Hz Residual Voltage: 50MΩ (500VDC megohm reference) Withstand Voltage: 1500VAC 50/60Hz 1min Vibration Resistance: 10-55Hz (cycle one minute) amplitude 1mm X, Y, Z 2 hours in each direction Impact Resistance: 500m/s² (50G) X, Y, Z 3 times in all directions Operating Environment: -25~+70°C, 35-95%RH Storage Environment: -30~+80°C, 35-95%RH Protection Circuit: Built-in Surge Protection Circuit, Power Reverse Polarity Protection Circuit, Over Current Protection CircuitPackage List: 1 x Photoelectric Sensor Switch
CDD-11N 10mm Infrared Proximity Sensors, Cylindrical Diffuse Reflection Photoelectric Sensor Switch NPN NO 4-Wire 12-24VDC 300mA
$38.99
- WORKING PROCESS:The photoelectric switch converts the input current into a light signal on the transmitter, and the receiver detects the target object according to the intensity or presence of the received light.
- WORKING PRINCIPLE:Photoelectric switch makes use of the block or reflection of the detected object to the light beam, and the circuit is turned on by the synchronous circuit to detect the presence or absence of the object.
- HIGH SENSITIVITY:The sensor uses infrared light to detect the objects for sensitive detection with delay that can be almost ignored.
- WIDE RANGE OF USES:The detection objects of this photoelectric sensor switch are not limited to metal, and all objects that reflect light (or block light) can be detected.
- SAFETY DESIGN:The photoelectric switch converts has built-in multiple protection circuits to ensure safe use.
In stock
Additional information
| Weight | 0.07 kg |
|---|---|
| brand | Garosa |
| dimensions | 8 x 8 x 8 cm; 70 Grams |