Installation Notes The first step is to rotate the 4 screw rods separately to complete the installation The second step is to turn on the power and set the desired temperature. The factory default is 39 degrees. You can set the desired temperature according to your needs. The setting method can refer to the following instructions Tip: The actual temperature is the surface temperature of the sensing probe, not the temperature under the heating plate. You can place the sensing probe in any position. But it is recommended to place it under the heating plate, close to the chicks. How to Use The Thermostat? Connect the power supply equipment, the display shows the measured temperature at this time, press the SET button, the temperature on the display flashes, press + – to set the desired temperature (press + – to quickly rise and fall) After the setting is complete, press SET to confirm and return. At this time, the thermostat controller will automatically switch on and off the relay according to the setting! The thermostat output is a 20A relay, which can meet various high-power loads. Status description of indicator light, digital tube and buzzer Indicator light: flashing means the cooling or heating start delay, constant light means the relay is closed Digital tube: display LL as the sensor is open circuit, please connect the sensor according to the instructions; display HH as the measuring range is out of range, the thermostat Refresh rate: 0.5 S Input power: 110V-240V Temperature controller input power: 12V Measurement input: NTC (10K 0.5%) waterproof sensor Current: 20A
Chick Brooder Poultry Incubator Up to 15-20 Chicks, With Thermostat Temperature Control and Digital Display, Coop Cage Heater
$167.99
- Simulate a Mother Hen’s Warmth and Safety : The chick heating plate simulates the warmth of the hen, and Heated evenly . Providing a warm, safe and comfortable place for the chicks.
- Equipped with Thermostat: Be equipped with an LED display and temperature setting buttons, which can observe and set the desired temperature according to the environment at any time, convenient and safe.
- Perfect size for chicken coop: 12″ x 12″ The brooding heater can heat about 15-20 newly hatched chicks or ducklings and other poultry or wild birds. The brooder’s legs are adjustable so that the chicks can stand and directly.
- Safer than heating bulbs: This chick heating plate prevents short-circuiting and overheating with the built-in resistant fuse and thermostat, ensuring maximum safety for pets and poultry. Safer than heating bulbs.
- Tip: The actual temperature is the surface temperature of the sensing probe, not the temperature under the heating plate. You can place the sensing probe in any position. But it is recommended to place it under the heating plate, close to the chicks.
In stock
Additional information
| Weight | 1.19 kg |
|---|---|
| brand | hisunfarm |
| dimensions | |