Cimco 100770 power strip Automatic, i.e. wire stripper is self-adjusting to the conductor cross-section, suitable for a variety of cables. 2 – and 3-wire flat cable from 0.75 to 2.5mm² and width up to 12mm. Round cables from 0.5 to 16mm². Also suitable for problematic insulation, such as silicone or outer sheath of polyvinyl chloride or rubber flex cables. Optical linear dimensions are 8mm to 24mm or 5/16 inch to 1 inch since the stripping length is always the same in the series working with end sleeves and cable lugs. Good power transfer and a window to push through the cable allow stripping up to 20 cm, depending on the cable type. The special scanning system automatically adjusts to the respective conductor cross-section and prevents damage to the inner conductor. A 5-fold fine pressure adjustment on various cable types and diameters is possible. Comes with integrated, easily accessible side cutter for flexible and solid copper conductors up to a diameter of 3mm. Ergonomic pistol grip for fatigue-free working. Weight: only 200 grams.
