Clearwater CH0005 PH Plus Increaser for Swimming Pool and Spa Treatmentp>Bestway Clearwater 1 kg pH Plus allows you to adjust your pools alkalinity with ease. Avoid the itchy eyes and irritated skin that are caused by a drop in the levels of pool acidity.
The recommended pH balance of pool water is between 7.2 and 7.6 (you can test pH levels using Clearwater Dip Test Strips, which are available on the Bestway Chemicals section of the website). When pH levels drop below 7.2 acidity increases and pH treatment needs to be applied.
Pool alkalinity can be altered by any number of factors: Leaves, insects, personal cosmetics. With the effects that too much or too little can have – the Bestway Clearwater 1 kg ph Plus is a should have chemical for any home pool set up.
As with all chemical products, instructions and warnings should be followed and heeded very carefully.
Using the Dip Strips couldn’t be easier. Just dip one in the pool or spa, quickly remove it and hold horizontally. Check the results against the handy diagram on the bottle.
The Bestway Clearwater Dip Strips are also capable of indicating the waters pH and Total Alkalinity levels making them a one stop shop for monitoring your pool chemicals.
Chlorine levels inside an above ground pool should be 1 – 3 ppm (3 – 5 ppm for spas), pH levels should be 7.2 – 7.6 and total alkalinity levels should measure 80 – 100 ppm or 100 – 120 ppm, depending on the chemical solutions used to treat a pool.
Clearwater CH0005 PH Plus Increaser for Swimming Pool and Spa Treatment & CH0012 25 Dip Test Strips for Swimming Pool and Spa Treatment
$58.99
- Product 1: Increases the pH level of your spa or above ground pool to maintain comfortable pH levels for your skin whilst you’re enjoying your hot tub or pool
- Product 1: Ensures that your spa or pool stays hygienic and looking pristine so you can fully enjoy your experience
- Product 1: Maintains the optimum pH level to enable chlorine treatment to work more effectively and clear any harmful bacteria
- Product 1: Instructions are clearly stated on the bottle and it’s very simple to use- simply dissolve the recommended amount of pH chemicals in warm water and add the solution to the pool, increasing its pH level- check after minimum 4 hours
- Product 2: 25 test strips: Includes 25 x clearwater dip test strips that make caring for your pool simple and easy
- Product 2: Measures chlorine, PH and alkalinity: Measures various quality levels of swimming pool or spa water to indicate what chemicals are needed to prevent harmful bacteria entering your water
- Product 2: Quick and easy to use – simply dip the test strips into the water and check the results on the handy printed colour chart
- Product 2: Directions: Dip strip and remove immediately, hold strip level for 15 seconds, use simple-to-use guide on bottle to read the results
In stock
Additional information
| Weight | 1.0 kg |
|---|---|
| brand | Bestway |
| dimensions |