This type of the USB CNC Controller Card is of strong anti-interference ability, the frequency converter interface is isolated from the computer and the main control circuit,. The interference signal will not be introduced because of the introduction of the external strong current equipment.
The interface output 0-10V analog signal, also can be configured as 0-5V output, convenient for you to choose the type you need. To make the system more stable, you can use external 24V DC power supply to isolate USB and external port.
Super USB interface Mach3 motion control card, free drive, simple configuration and good compatibility. Especially designed for notebook and tablet PC, support for 4-axis linkage, you can connect four stepper motor drives or servo drives.
Specifications:
Size: 80×77mm/3.15×3.03inches
Weight: 160g/0.35
Package List:
1×USB CNC Controller Card 1×USB cable 1×CD
Note:
1, For this electronic product, pls care don’t touch the water when you use it, or the circuit will be damaged and has a shorter service life.
2, Please allow small errors in the dimensions due to accidental imprecise manual measurement. 3se note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
CNC MACH3 USB 4 Axis Motion Control Card, Interface Breakout Board for Stepper Motor Driver
₪189.99
- 0-10V/0-5V ANALOG SIGNAL– The interface output 0-10V analog signal, also can be configured as 0-5V output, convenient for you to choose the type you need
- Strong anti-interference ability, the frequency converter interface (AVI+, AVI-) is isolated from the computer and the main control circuit, won’t be introduced by external strong current equipment
- Super USB interface Mach3 motion control card, free drive, simple configuration and good compatibility. Especially designed for notebook and tablet PC
- 4 General-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to 0 and other operations
- Maximum step-pulse frequency is 100KHz, which is suitable for the servo or stepping motor
In stock
Additional information
| Weight | 0.14 kg |
|---|---|
| brand | Walfront |
| dimensions |