????
Package included:
1 x environment-friendly industrial rivet gun (length: 330mm, weight: 300g)
20 x aluminum rivet (diameter: 3.2mm, length: 11mm)
20 x aluminum rivet (diameter: 4.0mm, length: 10mm)
►
Our strength:
➊Alloy forging nut gun head with blackening treatment has higher antirust ability, toughness and durability
➋Strengthened high-pressure spring can adjust the strength of pulling rivet at will, which is convenient and labor-saving
➌Thickened chrome-plated steel material of high quality makes it resistant to deformation
➍Rivet collecting bottle simply store the rivet, convenient, efficient and environment-friendly
➎Supplementary small hexagonal wrench could replace the gun head easily, which is small, practical and convenient
????
Experience from other reviewer:
1. Thread the rivnut on until you can see the thread and it’s almost in line with the end of the rivnut.
2. Put rivnut in hole and close the handles. This should take a bit of strength but you shouldn’t feel like hulk hogan.
3. If it felt a bit tight back the thread out slightly. The easiest way to do this is to spread the handles and use the dial to see the thread moving. A single turn is probably enough. Now repeat step 2.
4. Depending upon the thickness you are clamping to you will probably need to turn the thread in a few turns and then compress the rivnut a bit more.
5. You can test if the nut is (very) loose by closing the handles and attempting to turn the tool, it shouldn’t be able to turn clockwise.
????
Warm tips:
Apply a drop of oil to the mechanism before usage would extend the service life.
This rivet gun suit for both aluminum rivet and stainless steel rivet of 2.4-4.8mm, not suitable for rivet of 6.4mm, please use the correct rivet.
If there’s any question, please feel free to contact us!