–Dual drive
The manual wire stripping machine is equipped with a hand crank handle, which is comfortable to hold. The handle of the wire strippers electrical is detachable, and an electric drill can be assembled at the connection. The manual operation can be instantly converted into electric operation, improving your work efficiency.
–Upgrade Knob
The upgraded knob screw does not require a hexagonal wrench. Loosen it to move the hole plate position and select the appropriate cable entry hole. The thin wire enters through the small hole at the top, and the thick wire enters through the large hole at the bottom.
–Anti-slip design
The groove of the manual wire stripping machine’s wire-passing roller is V-shaped, which can firmly hold the core wire under high friction and is not easy to slide or deviate.
Instructions:
1. Adjust the left and right adjusting nuts to center the blade.
2. Select the wire entry hole according to the width of the wire, and the wire climbs up and rolls into the wire roller.
3. Adjust the top knife adjustment nut so that the blade just presses the wire. (Note: Do not adjust it too deep to avoid damaging the wire core)
4. Rock the hand crank or start the adjustable cable stripper machine to start stripping the wire.
Specification:
Wire stripping range: 1~25mm
Size: 23*15*7cm
Weight: 1.43kg
Material: aluminum alloy + steel
Product list:
1* cable stripper machine
Warm Tips:
The product size may vary by 1~3cm, please refer to the actual product.
Thank you for visiting our store!