Depth Gauge,Depth Sounder,Digital Boat Depth Finder, Waterproof Transducer for Dashboard Depth Finder with White Backlight for Yacht, Marine Boat

$387.99

  • Material: Made of 316L stainless steel bezel and anti-fog glass, it has excellent anti-fog and waterproof properties, and can be used for a long time even in cold marine environments
  • Mode: Press the keyboard mode to change the function SH, DP, KL, A. Used to turn the monitor on or off. Short press to set the required value and keep the digital rising or decreasing smoothly
  • Application: boat depth finder easy to install, good durability, impact resistant, flexible and easy operation, suitable for yachts, small and medium boats, fishing boats and other types of sea transport
  • Practical: the working voltage of the digital boat depth detector is 9-32V, up to 16V, low power consumption, long life, high precision, short start time, maximum depth indication of 100m, you can immediately know the water depth
  • Function: This device only works with the 12V system to indicate the nominated depth. Normally, the buzzer will beep when it is connected correctly, then the power will turn on

In stock

— OR  —

— OR  —

  • International Express shipping available
  • 30 day easy returns
Guaranteed Safe Checkout

Specifications:
Item Type: Depth Sounder
Material: 316L stainless steel, anti-fog glass, ABS
Mounting Hole Diameter: Approx. Φ52mm/2inch
Depth indication range: 0-100m/0-328ft
Backlight Color: White
Operating Voltage: DC 12V
Instant voltage: DC 9-32V, up to 16V
Working current: 60mA
Operating temperature: -30 °C to + 75 °C.
Storage temperature: -40°C to +85°C.
Dial waterproof rating: IP67
Back cover waterproof rating: IP5

How to use:
Step 1: Open a 52mm diameter circular hole in the center control or another pre-installed position
Step 2: Put the tool into the open round hole
Step 3: Match the screw hole of the bracket to the screw on the back of the tool, then tighten it with the screw, and fix the panel with the bracket and watch frame
Step 4: Connect the power wiring directly to the rear terminal of the instrument, and then connect the corresponding sensor and wiring according to the distribution instructions to connect the power
Wiring method: the red wiring is connected to the positive electrode of the power supply, the orange wiring is connected to the backlight, and the blue wiring is connected to the negative electrode of the power supply

Packing list:
1 x Depth Sounder
1 x Transducer (with 10m cable)
2 x Screws
1 x power cable.
1 x Manual

Additional information

Weight 0.67 kg
Brand

EIMSOAH