Digital Temperature Controller REX-C100, 0 ℃ ~ 1300 ℃ Alarm PID Temperature Controller Kits Digital Intelligent Thermostat Relay Output with K-Type Thermocouple Temperature Sensor

REX-C100 Temperature Controller KitSpecifications: ✔ Condition: High quality. Accuracy ± 0.5% FS ✔Cold-end compensation tolerance: ±2℃ (can be changed by software to 0~50℃). ✔Resolution: 14 bit. ✔Sample cycle: 0.5 seconds. Power supply: AC 100-240 V. ✔Process value (PV), setting value (SV) ✔Output and self-optimisation can be displayed by: LED. ✔ PIN control (including ON/OFF, step PID and continuous PID) self-optimisation. ✔Relay output: Contact capacity: 250 V AC 3 A (resistive load). ✔Output contact capacity: 250 V AC 3 A (resistive load). ✔Setting value (SV): identical to the measuring range (PV). ✔Proportional range (P): 0 ~ Full range (ON/OFF control when setting to 0). ✔Integral Time (I): 0 ~ 3600 seconds. (No integral action at 0) ✔Derivative time (D): 0 ~ 3600 seconds (no dissipation at 0). ✔Heat reset proportional cycle: 1 ~ 100 s. ✔Detector temperature range: 0 to 1000 ℃. ✔Insulation resistance: > 500 M Ohm (500 V DC). ✔Insulation resistance: 1500 V AC/min. ✔Power consumption: 10 VA ✔Service Environment: 0–50 ℃. ✔Environment without corrosive gas 30 ~ 85% RH. ✔K thermocouple probe cable. ✔ Length: 1M ✔Sensor diameter: 4.5 mm. ✔Temperature ringing: 0 – 400 °C. ✔Internal insulation: Fibreglass. External shielding: Insulated shielding. ✔Output voltage range: standard type. ✔Output current: 40 A. ✔Input voltage: DC 3 – 32 V. ✔Output voltage: 24 – 380 VACage contents: 1 x PID Temperature Controller 1 x K-type sensor 1 x SSR.