Digital Transitor SMD Conponents Tester, ESR02 Pro LCD Capacitor Tester Inductance Meter, Transistor Tester for Measuring SMD Components, etc

$116.99

  • ✿【Brief introduction】This transitor meter is a small tool for the engineer, electronic maintenance and factory. It is very easy to test plug-in and SMD devices, also can test different kinds of diodes, triodes, thyristors, MOSFET, enable to analysis the device type, the polarity of the pin, the output HFE, the valve voltage, the junction capacitance of the FET.
  • ✿【LCD backlight digital transistor tester】A key operation, boot test, a key to gete LCD display with backlight function for easy reading.
  • ✿【Wide application – Greatly practical】Automatically test the pin elements and display them on the LCD. Automatic detection of components such as NPN, PNP bipolar transistors, N-channel and P-channel MOSFET, diodes (Including double diodes), thyristors, transistors, resistors and capacitors, etc.
  • ✿【Main use】Can detect transistor emitter forward bias voltage, MOSFET protection diode and amplification factor reference. MOSFET gate threshold voltage and gate capacitance measurement.
  • ✿【Note】1. Before testing the capacitor, be sure to discharge it, otherwise it may damage the internal circuit. 2. If using DC supply, please choose DC 9V~12V adapter. (including 9V and 12V) 3. Can be powered by a 9V 6LR61 battery (NOT included), when the battery power is under 6V, please replace a new one.

In stock

— OR  —

— OR  —

  • International Express shipping available
  • 30 day easy returns
Guaranteed Safe Checkout

Digital Transitor SMD Conponents Tester, ESR02 Pro LCD Capacitor Tester Inductance Meter, Transistor Tester for Measuring SMD Components, etc

Specification:
Brand: BSIDE
Model: ESR02 Pro
Resistor: 0Ω~50Ω, Resolution: 0.01 ohm
Capacitor: 25pF~100mF, Resolution: 1pF
Inductance: 0.01mH~20H, Resolution: 0.01mH
Capacitor ESR Resolution: 0.01Ω
Battery: 1pcs x 9V 6LR61 Battery (NOT included) Size: Approx. 14*8*4.5cm/5.5*3.1*1.8inch
Weight: Approx. 223g / 7.9oz

Calibration:
Short the test pin 1, 2, 3 together and push “POWER / TEST” button, then the screen prompts to enter calibration, push the button again within 2 seconds to confirm. Few seconds latter the screen prompts to release pin 1, 2, 3, release them and wait for calibration finish.

Package List:
1 x Transistor Tester
1 x User Manual

Note:
1. Before testing the capacitor, be sure to discharge it, otherwise it may damage the internal circuit.
2. If using DC supply, please choose DC 9V~12V adapter. (including 9V and 12V)
3. Can be powered by a 9V 6LR61 battery (NOT included), when the battery power is under 6V, please replace a new one.

Additional information

Weight 0.216 kg
ean

8130886901596

brand

Plyisty

dimensions


:

14 x 8 x 5 cm; 216 Grams