DIY Magnetic Automobile Car Camber Castor Strut Wheel Car Magnetic Gauge Tool Kit Truck Camber Castor Strut Wheel Hub Alignment

Made of steel, high strength and plasticity, good toughness, high safety and reliability. The magnetometer is connected to the wheel hub or disc brake for easy use. You can perform simple level adjustments from -5 degrees to 5 degrees. Easy to read. The scale of our products is clear, and the eye-catching liquid column allows you to see at a glanceures: 【PREMIUM QUALITY】Our products are made of high-quality steel, which not only has high strength, can be used repeatedly, but also has toughness and plasticity. In general, our products have high safety and reliability. 【PRECISION MATERIALS】Easy to read and easy to operate. The scale of our products is clear, and the eye-catching liquid column allows you to see at a glance. After the pillar is repaired or installed, use this simple level to restore the camber setting of the vehicleification: Condiiton: 100% Brand New Color: As picture shown Material: Steel    Measuring range: 1.5 (mm) Measurement accuracy: 99% Size: (L) x (W) x (H) 5 x 5 x 13cm / 1.97″ x 1.97″ x 5.12″(appr.)Instructions for use: 1. Remove the four-wheel positioning sensor (fixture), remove the tire. 2. The magnetic level to carefully suck in the brake wheel on the side. 3. The level of adjustment to zero. 4. Installed on the required positioning of special parts. 5. The use of special tools, with the degree of magnetic level instructions, adjust the positioning of parts to the required measurement angle. 6. With a locator re-test if found to have a little deviation, just fine at the bottom of the car can be. (Generally a little deviation does not cause positioning failure)age Included: 1 x  Magnetic Gauge Tool