ip: M10050
Frequency: GPS L1 C/A,QZSS L1 C/A/S,BDS B1I/B1C,Galileo E1B/C,SBAS L1 C/A:WAAS,EGNOS,MSAS,GAGAN
Operation Mode: GPS+BDS+GALILEO+SBAS+QZSS
Sensitivity: Track -166dBm, Re-arrest -160dBm, Cold Start -148dBm, Hot Start -160dBm
Horizontal Accuracy: 1.5m CEP 2D RMS SBAS Auxiliary(for open sky)
Speed Accuracy: 0.05m/s
Dynamic Heading Angle Accuracy: 0.3 deg
1PPS Time Accuracy: RMS 30ns, 99% 60ns
Start Time: Cold Start 27s, Hot Start 1s, Assisted Start 1s
Baud Rate: 4800bps – 921600bps, default 38400bps
Output Level: TTL level
Output Protocol: NMEA, UBX
NMEA Sentences: RMC, VTG, GGA, GSA, GSV, GLL
Update Frequency: 0.25Hz – 18Hz, default 1Hz
Second Pulse: Configurable from 0.25Hz to 10MHz, default period 1s, high level last for 100ms
Graviational Acceleration: <4g
Voltage: DC 3.6V - 5.5V, Typical 5.0V
Current: Normal 50mA/5.0V
Size: 28*28*11mm
Connector: 1.25mm 6pin
Package Included
1 x BE-880 gps module
3 x cables
DIYmalls BE-880 GPS Receiver Module TTL IST8310 Compass 10th Chip 38400bps for Arduino FPV Aircraft CC3D Flight Control, Replace BN-880 GPS
$87.99
- -be880 GPS equiped with 10th chip to replace the bn880 gps, more accurate and receiving signal faster.
- -Baud Rate: 4800bps to 921600bps, default 38400bps( Remember it is NOT 9600bps).
- -be 880 module connection with flight control, usb to ttl and develop board: gnd to gnd, tx to rx, rx to tx, vcc to 5v.
- -be-880 gps should be used outdoor, and the antenna side facing to the sky.
- -The blue (TX) light flashes when power on, indicating there is data output.
In stock
Additional information
| Weight | 0.021 kg |
|---|---|
| Brand | DIYmalls |