oor hinge hole opener is designed for wooden door hinge groove, lock body guide plate groove and other slotting applications.
2. Any lock and hinge can be fitted in a matter of a few minutes, speeding up the task immensely when compared to traditional methods.
3. This template can be used for doors, cabinet doors and also for flat door lock mortise sleeves.
4. The length and width positioning supports flexible adjustment in four directions, accurate positioning and fast slotting rate.
5. Adopting aluminum alloy material, the tool is very strong and rust-proof.
6. No tools required, fast clamping: hand-tightened screws, fast clamping, efficient work.
7. Dimensions: 34×20 cm / 13.4 x 7.9 inches. Opening Size: Max 18 cm/7.1 inches. Maximum grip: 6 cm/2.4 inches.
Install the lock body guide plate:
1.Mark the position of the lock body guide plate on the wooden door.
2.Put the slotted retainer on the wooden door and fix it (clamp by tightening the black nut).
3.Using the wood router to slot.
4.Use a chisel to chisel away the curved part to make the edge flat.
5.Complete the slot and install the lock body guide plate.
Install the hinge:
1.Mark the position of the hinge on the wooden door.
2.Put the slotted retainer on the wooden door and fix it.
3.Adjust the screws on the four sides to determine the working range of the wood router.
4.Adjust the depth of the blade of the wood router, and set the blade to extend beyond the edge of the door.
5.Slotting with the wooden router.
6.There is a certain chance that the edge of the door will be damaged when grooving ,so don’t hollow out all the wood at the edge.
7.Use a chisel to chisel off the curved and reserved sections, making sure the edges are flat.
8.Finish slotting and install hinges.
Package:
1 * Slot Positioner
1 * Mini Adjustment Wrench
2 * Edger Bedknife