ECOPROTEC BLACKSTONE COLOUR RESTORER-1L – Staining Solution (1 Litre)

OLOUR RESTORER-Formerly known as ECOPROTEC Blackstone Sealer & Restorer Staining Solution 5L ASIN ;B07H962P9V & 1L ASIN; B07H96T7BK
For restoring the appearance of all types of Faded dark natural and artificial stone including limestone, Marble Slate and concrete pavers. Water-based black impregnating sealer
Coverage: up to 30 square metres per litre per coat.
Shelf Life Up to 2 years for un-opened containers.
DIRECTIONS; Ensure surface to be treated is completely clean, dry, and free from dirt, grime, cement, and grout. First wash surfaces with a dilute solution of ECOPROTEC Intensive Cleaner (Link; https://amzn.eu/d/4HNernr ) 1:5 and scrub with a white nylon pad.
Rinse well to remove residues and leave to dry.
Application:
Wear gloves and ensure that any surfaces not to be treated are covered and protected. IMPORTANT: This product is a permanent staining solution that will darken the surface of the stone and the grout joints making it very difficult to remove once applied.
It is an impregnating sealer that needs to fully absorb into the stone. It is not film forming, so any excess left on the surface should be removed.
Always test on a small area before general application to help establish best method and optimum number of coats required.
Do not walk on treated surfaces until the solution has completely dried.
Shake bottle well before use. Work in manageable areas at a time as far as you can reach without stepping into the solution. Apply a small amount to the surface and spread out evenly using a sealant applicator, foam roller or paint brush. Allow to penetrate the stone. If a second coat is required apply immediately after the first has absorbed. Do not allow the first coat to fully dry before application. . Do not use when surfaces are very cold or very hot. Ideally between 5 – 25°C.