EFB-Elektronik Duplex Jumper SC-SC 50/125, OM3, LSZH, Aqua, 3.0 mm, 15 m

LWL patch cables are defined components of an internationally standardised structured wiring of ISO/IEC11801. Historically, many different connectors have grown in the structured cabling, whereby the following are still relevant: LC, SC, E2000®, MPO/MTP A LWL patch cable is the shortest connection between a passive wiring port and an active network port or a point-to-point connection of two active network ports. Quality classes allow a qualitative differentiation of the LWL patch cables depending on the network service. Similar designations for patch cables: Manoeuvring cable, adapter cable, connection cable, hybrid cable, jumper, connection cord. Features of EFB LWL patch cable. Reinforced strain relief with aramid yarn. Halogen-free and flame-retardant jacket in accordance with IEC-60754-2, IEC-60332-1 and IEC-61034. EFB LWL connectors meet the minimum Quality class Grade B/2 according to IEC-61753-1 for single mode and grade A/1 for multimode according to IEC- 61753-222-2 (Draft). 100% tested and with individual measuring protocol. Fibre type: Multimode 50/125; Category: OM3; Number of fibres: 2; Snagless grommet: attached; Connector type 1: SC duplex; Connector 1 colour: beige; Connector type 2: SC duplex; Connector connection 2 colour: beige; APC version: no; Maximum tensile force: 160 N; Minimum bending Adius ): 10xOD; minimum bending radius (dynamic): 20xOD; cable type: I-V (ZN) H; cable structure: duplex; cable diameter: 3.0 mm; jacket colour: aqua; jacket material: LSZH; flame-retardant: according to EN 50265-2-1; halogen-free: according to IEC60754-1; low smoke. equivalent to IEC6. 1034-1; Working Temperature: -20-70°C; Storage Temperature: -20-85°C; Insertion Loss 850nm: