Specification: Weight: 18g/0.6oz Common interface load: AC 250V/10A, DC 30V/10A Module Size (L*W*H): 50*26*18.5mm/2*1*0.7inch Bolt Hole: 3.1 mm; 44.5*20.5mm (spacing) Voltage: 5V, 12V, 24V (Optional)Module interface: 1. DC + : connected to the positive pole of power supply (voltage is required for relay, 5V, 12V and 24V for choice) 2. DC- : connect to the power negative pole. 3. IN: high or low level control relay suction Relay output terminal: 1. NO: relay changeover interface,relay suction front suspension, suction and COM short connection. 2: Relay common interface. 3: Relay normally closed interface,relay suction and COM short joint, suction clearance. High and low level trigger selection terminal: 1. When jumper is connected with LOW short circuit, it is triggered by LOW level; 2. High level is triggered when jumper is connected with high short circuit;Package List: 1 x Relay Module
Electromechanical Relays Optocoupler Module Single Channel High & Low Trigger 5V/12V/24V(5V)
$18.99
- 【optocoupler isolation】Using SMT optocoupler isolation, it has strong driving ability and stable performance; trigger current is 5mA.
- 【fault-tolerant design】This relay adopted fault-tolerant design, the relay will not move even if the control line is broken.
- 【wire jumper】Modules can be triggered by setting high or low levels through wire jumper; equipped with 4 fixed screw holes, convenient to use and install.
- 【connect directly 】The interface design is humanized. All interfaces can be directly connected through the terminal, which is very convenient.
- 【5V/12V/24V】Module operating voltage is 5V,12V,24V for choicer indicator light (green), 4-way relay state indicator light (red).
In stock