ElekTek premium B22 Safety Switch Lamp Bulb Holder with shade ring and choice of 10mm (M10) or Half Inch (26 TPI) bottom threaded entry size (intended primarily for attachment to a male hollow threaded connector). The patented Safety Switch insert ensures that whenever the bulb is removed the exposed brass plungers are cut off from the live supply. This means that you will be unable to operate the push bar switch when the Red safety Button is not depressed by a bulb. This lamp holder is a must in your house if children with inquisitive fingers are around. Base features internal locking screw mounted to the solid brass threaded base ensuring your light does not work loose with use – a superior solution vs cheaper, pressed-metal type bases that don’t carry this premium solid brass base with locking screw feature. Before installing, switch off electricity at mains. WARNING – ELECTRICITY CAN KILL – IF IN ANY DOUBT CONSULT A QUALIFIED ELECTRICIAN.
Before installing, switch off electricity at mains. WARNING – ELECTRICITY CAN KILL – IF IN ANY DOUBT CONSULT A QUALIFIED ELECTRICIAN.
ElekTek Safety Switch Lamp Bulb Holder 10mm Entry BC B22 with Shade Ring and Locking Screw in Base Nickel
$32.99
- Make sure this fits by entering your model number.
- IMPORTANT: Switch will ONLY work when a bulb is fitted – Patented Safety Switch Push-Bar Design
- For all types of B22 (22mm) Bayonet Cap Bulb: Incandescent, LED and Halogen
- Made in UK: Solid Brass construction with Solid Brass Shade Ring. ALWAYS REMEMBER: Metal fittings MUST be earthed
- Dimensions: choice of 10mm or 1/2″ threaded bottom entry – PLEASE CHECK YOUR THREAD SIZE BEFORE ORDERING; Height 63mm, Diameter 32mm (Max.); Cable/Flex aperture approx. 7mm
- Suitable for lighting circuits only – T2 temperature rating (220°C). Fully approved to BS 7895:1997
In stock
Additional information
| Weight | 0.06 kg |
|---|---|
| brand | ElekTek |
| dimensions | 11 x 8 x 3.6 cm; 60 Grams |