Eltako FTS14EM Input Module for RS485 Bus, Pack of 1,

Eltako RS485 bus input module, 10 control inputs for universal control voltage. Stand-by loss only 0.1 watts. Connects to the Eltako RS485 bus. Cross wiring bus and power supply with plug-in bridges. Works in conjunction with FAM14 or FTS14KS. 10 control inputs +E1..+E10/-E galvanically separate from the supply voltage. Control voltage: 8..230V UC. From manufacturing week 44/15, the control inputs can be activated either for buttons (delivered condition), window door contacts or motion sensors. Control inputs for buttons: telegrams are generated by radio buttons (e.g. 0x70). Each FTS14EM can be set to either UT (= universal button) or RT (= direction button). Control inputs for window door contacts: telegrams of the radio window door contact FTK are generated (EEP D5-00-01). When the input is controlled by the contact with the external control voltage, the telegram window is closed to be generated. When the contact is opened, the telegram window is opened. As with the FTK wireless sensors, the status telegram is repeated every 15 minutes. Motion sensor control inputs: telegrams of the wireless motion brightness sensor FBH are generated (EEP A5-08-01), with the brightness value always 0. When the input is controlled by the contact with the external control voltage, the telegram motion is generated. When the contact is opened, the telegram will not move. As with the radio sensors FBH, the status telegram is repeated every 15 minutes. Each telegram of a contact input must be introduced with an identification number (ID) into one or more actuators according to their instructions. The lower rotary switch determines which group an FTS14EM belongs to.