Kitchen and bathroom drawer kit with all the necessary elements for assembly. It is the perfect solution for your kitchen, bathroom or cabinets with an elegant design in anthracite grey. Each kit consists of all the elements required to install an external drawer with a height of 93 mm, a depth of 500 mm and a module width of 600 mm. It contains: two side rails, a set of soft closing guides, a set of trim covers, floor and back boards and the drawer front fasteners. All you need is the front plate with the required dimensions of the drawer. The side panels are made of steel with anthracite grey painted surface and allow the drawer front to be adjusted 2 mm vertically and 1 mm horizontally. The guides are full extension with soft closing and a load capacity of up to 40 kg. The floor and back boards are made from chipboard with anthracite grey colour and have a rough finish to achieve greater surface resistance. The boards are 16 mm thick and are cut to fit standard modules of 600 mm width (549 x 490 mm for the floor side and 526 x 63 mm for the back). However, can be cut to fit the width of the required module.
Emuca – Drawer Kit for Kitchen or Bathroom with Included Boards and Total Extraction Slides with Soft Closing, 93 mm Height for 600 mm Module and 500 mm Depth, Anthracite Gray.
$144.99
- Hardware kit necessary for mounting a drawer of 93 mm height and depth of 500 mm, except for the drawer front, for modules with a width of 600 mm and a side thickness of 16 mm.
- Possibility of adjusting the width of the drawer to the width of our module by cutting the boards that are included in the kit.
- Synchronized total extraction runners, with soft closing and load capacity of 40 kg.
- Adjustment of the front: ±2mm in vertical and ±1mm in horizontal.
- Made of anthracite gray painted steel and chipboard with melamine of the same colour.
In stock
Additional information
| Weight | 7.72 kg |
|---|---|
| brand | Emuca |
| dimensions | 53 x 58.5 x 8 cm; 7.72 Kilograms |