Angular contact ball bearings are installed in rolling mills as wire rod block bearings gear bearings and roll bearings (thrust bearings). They ensure the utmost guiding accuracy and a very good high speed suitability.
FAG QJ217-MPA-C3 Angular Four Point Contact Ball Bearing
$109.99
- Due to the design of the rolling element raceways with their high raceway shoulders, the contact angle of 35° and the large number of rolling elements
- Single row four point contact bearings capable of supporting axial loads in both directions are often combined with a radial bearing and used as an axial bearing with radial clearance in a housing
- The possible skewing of the inner rings in relation to the outer ring depends on the bearing load, the operating clearance and the bearing size and is very small.
- Bearings with solid brass cages can be used at operating temperatures from –30 °C to +150 °C
In stock
Additional information
| Weight | 2.22 kg |
|---|---|
| brand | FAG |
| dimensions | 16.1 x 15.8 x 3.7 cm; 2.2 Kilograms |