FeinTech VAX01301 HDMI Audio Extractor Adapter Converter Splitter 5.1 with Bluetooth Transmitter 4K 60Hz ARC

The VAX01301 is used to output the sound from an HDMI signal additionally via Bluetooth or via RCA (analog) and SPDIF Toslink (digital). So you can use a Bluetooth headphone or Bluetooth speaker to output the sound. Or active boxes and a stereo system that connects to the audio outputs. If the TV has HDMI ARC (or HDMI-eARC), the VAX01301 can be connected there and thus provide the internal TV sound of apps and receivers. HDMI ARC is activated at the touch of a button. So that an output in stereo or Bluetooth is possible (Bluetooth cannot process 5.1 sound! ), the audio format must be set to PCM stereo on the TV, not Bitstream or Dolby. The HDMI audio extractor can also provide the sound of a player connected to the HDMI input. The HDMI output can connect a TV, monitor or video projector. Ultra HD video resolutions up to 4k 60Hz HDR or Dolby Vision are supported. This input also emits stereo sound via Bluetooth or RCA / SPDIF. 5.1 sound with Dolby Digital or DTS can only be extracted via SPDIF Toslink. Simultaneous use of Bluetooth and audio output is not possible. Using the dial button 2. The maximum audio format of the player can be limited. For example, on stereo to enable Bluetooth transmission. In advanced mode, all audio formats are supported. But higher audio formats can only be transmitted via HDMI, not via RCA or Toslink. The VAX01301 delivers constant audio output levels. The digital audio signals can only be controlled after analogue conversion in the volume, i.e. in the headphones or on the sound system. Many TVs or media players offer you to control the sound system using a learning remote control. HDMI CEC is allowed between HDMI input and output. The power supply of the VAX01301 is via USB (power supply is not included), e.g. from the TV. Box contents: HDMI audio extractor, USB cable, instructions (English language not guaranteed). Dimensions: 105 x 65 x 28 mm.