FloPlast External Air Admittance Valve AX110 Push Fit/Solvent 110/82mm The AX110 has been designed for installation directly into 110mm UK designated pipe with the use of and EPDM finned seal. Additionally the AX110 can be installed solvent welded directly onto 82mm UK designated pipe by removing the finned seal and using the socket on the body. The AX110 has the inclusion of an insect/debris grill manufactured from Polypropylene. Document H of the Building Regulations Clause 1.33 states that AAV’s should not be used externally or in dust laden atmospheres, however due to the design criteria requirements of the termination of SVP’s within 3 metres of an opening window, and the use of the roof as habital space and also the upturn in loft/roof area conversions, and as a means of overcoming unsightly SVP installations, Building Control Officers are accepting their use. FloPlast strongly advise that confirmation of acceptance of the use of the AX110 is gained from Building Control prior to installation.
FloPlast AX110AG Anthracite Grey External Air Admittance Valve 110mm – 82mm Push Fit/Solvent.
$148.99
- Fitted with a mesh to prevent the ingress of environmental debris and insects.
- Product is A1 approved in accordance with BS EN 12380 – it can be installed below the flood level of connected appliances.
- Tested and approved for use in installations varying between -20° & +60°C (no insulation required).
- Kite marked to BS EN 12380 – Licence number KM512474.
- CE marked to BS EN 12380 Attestation level 4
In stock
Additional information
| Weight | 0.53 kg |
|---|---|
| brand | FloPlast |
| dimensions | 14.79 x 14.79 x 12.1 cm; 422 Grams |