Technical data:
Features: B.
Rated residual current: 30 mA.
Rated residual current interruption capacity a: 500
Trigger time: 0.1 s
Resistance to voltage surge U Imp: 6000 V.
Pollution level: 2.
Nominal voltage: 230 V.
Insulation voltage: 500 V.
Current frequency Hz: 50/60.
Maximum cross section of connecting wires: 25 mm2
Tightening torque of the connection terminals: 3 Nm.
Connection option via comb rails: yes.
PLN8NT residual current circuit breaker with overcurrent module, AC type – for protection of devices in case of damage and flooding, protection against electric shock and for short circuit/overload protection function. It is also used in construction, industrial, lighting and distribution systems as an on/off switch for circuits.
The PLN8NT residual current circuit breaker with AC type overcurrent module is used in circuits with the following parameters:
Power supply via AC 50/60 Hz.
Nominal voltage: 230 V.
AC up to 16 A.
The product must only be installed by authorised persons. Disconnect the power supply before installation. To improve safety of use, it is equipped with a clear power indicator. Secure and easy mounting on the TH35 rail with plastic clips.
The PLN8NT line residual current circuit breakers are equipped with a TEST button to check the internal operation of the device. The test should be performed every 30 days.
The circuit breaker complies with the standards of IEC / EN61009-1.