Specification:
Item Type: Wall Sconce
Material: Iron
Weight: Approx. 900g/31.7oz
Lampshade Maximum Diameter: Approx. 18cm/7.1in
Lampshade Height: Approx. 16cm/6.3in
Upper Lamp Arm Length: Approx. 25cm/9.8in
Lower Lamp Arm Length: Approx. 25cm/9.8in
Base Plate Diameter: Approx. 12cm/4.7in
Lamp Base: E27
Applicable Bulb: E27 Bulb (Not Including Bulb)
Lighting Area: 5~10㎡
Voltage: AC85-265V
Shell Color: Black
How to Use:
1. Remove the screws on the chassis and take out the fixed iron sheet
2. Install the fixed iron piece on the wall with a screw pack
3. Use a wire connector, connect the wire, and connect the AC85-265v current (disconnect the total current installation)
4. Fix the chassis on the iron sheet and tighten the screws on the lamp panel
5. Fix the knob with the lamp post, connect the lamp post and fix it, then turn the knob on the lamp head down to install the lamp shade
6. Install E27 bulb (not included)
7. Turn on the power and complete the installation
Package List:
1 x Base Plate
1 x Lampshade
1 x Lamp Holder
1 x Black Lampshade Ring
2 x Light Pole
3 x Light Pole Fixing Knob
1 x Wire Connector
1 x installation Package (2 x Screws, 2 x Expansion Screw Tube, 2 x Red Screw Cap, 2 x Screw Washer)
Note:
1. Please allow 0‑2 cm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.