Warm Tips : ✔ Must drill a hole first when the break screw surface is smooth. Otherwise the drill bit will slip. ✔ Reverse use the bit, drill the first hole deeper will easier to take out. ✔ It is best to use electric hand drill, can not be used the hammer drill mode! ✔ Must be vertical and low speed when drilling (RPM≤200)ification: Material: High-Speed Steel 4241 Drill: #1, #2, #3, #4, #5, #6, #7, #8, #9, #10 Extractors: #1, #2, #3, #4, #5, #6, #7, #8, #9, #10 Extension Bit Holder: 60mm Socket Adapter: 26.3mm Qty: 20pcsHow to Use the Screw Extractor? 1. The size of #6 – #10 needs to be installed in the socket adapter first, and then attach it to the extension bit holder. (The other sizes can be attached to the extension bit holder directly). 2. Make sure that the workpiece is safe and will not be moved when using the extractor. 3. Select a screw extractor that is thinner than the damaged screw head. 4. Use the drill(Dr) bit to drill a hole in broken screws. 5. Change to use the extract(Ex) bit with the same size. 6. Reverse use the drill and take out the broken bitage Included: 20 x Damaged Screw Extractors 1 x Magnetic Extension Bit Holder 1 x Socket Adapter
Gasea 22 Pcs Damaged Screw Extractor Set for Broken Screw HSS Bolt Extractor Stripped Screw Remover with Magnetic Extension Bit Holder and Socket Adapter Kit
$35.99
- Damaged Screw Extractor included 10pcs of drills and 10pcs extractor ( Total sizes from #1-#10), with 1pcs extension bit holder and 1pcs the socket adapter, total 22 pieces.
- Made of fine quality High-Speed Steel 4241. High hardness, completely model specification to help you take out the different sizes(1-12mm) of damaged screw or bolts.
- With 2 extension bit holders, can remove in one step, do not need to conversion the extractor or adjust the chuck. Low speed (RPM≤200) and reverse to use when drilling, drill the first hole deeper will easier to take out.
- Suitable for the screws or bolts in wallboard, wood and sheet metal, such as allen bolts, machine screws, lag bolts, wood screws, hex bolts, sheet metal screws and other.
- Kindly Note: It is best to use on electric hand drill, CANNOT be used the hammer drill mode! In addition, must be reverse use in the whole process and in low speed and reverse use, or you’ll get hurt.
In stock
Additional information
| Weight | 0.16 kg |
|---|---|
| brand | Gasea |
| dimensions | 12.8 x 10 x 3.4 cm; 160 Grams |