Features:
Mode Switching
The Wood Moisture Meter supports four modes, which can be switched by long-pressing this button to meet various needs.
Wall Moisture Meter
Data Hold
The current reading can be held by freezing the screen with the HOLD button.
Moisture Meter
Auto switch off
The moisture meter is designed to be energy efficient and will automatically switch off after 5 minutes if not in operation, prolonging battery life.
Humidity Reader
Durable non-slip design
The humidity meter is ergonomically designed on the inside for easy grip and durable non-slip design.
Notes on hygrometers
Why are readings often 0 in winter?
The measurement is not valid, the measuring needle only slightly touches the surface of the object to be measured.
A reading of 0 usually indicates that the wood is very dry. In this case, the wood acts as an insulator, preventing the hygrometer from detecting enough electrical conductivity to cause a 0 reading.
Specifications/Parameters:
Stud Maximum detection depth: > 38mm
Metal Maximum Detection Depth: > 60mm
AC Wire Maximum Detection Depth: > 51mm
Magnet Nail Finding Depth: >= 2.5mm
Operating voltage: single 9V battery
Low battery indicator: 7.5V -/+0.3V
Operating current: <20mA
Operating temperature: 0~40