Specifications: Rated voltage: 20 to 50 VDC Rated current: 12A Current limiting: 15A Maximum speed: 20000RPM Storage temperature: -20℃~+65℃ Usage environment: Avoid direct contact with dust, fumes and corrosive gases Temperature: 0-45℃ Humidity: < 80%, no frost, frost free Shock: 5.9m/S2 MAX Storage humidity: 0~95%RH Detail: 1 modes : External potentiometer: through this potentiometer speed regulation; External voltage: external 10VDC voltage speed regulation; 2. Speed output PG signal: There is a 5v-revolution pulse output between the port and the ground. The output frequency is set to P (Hz), the motor class logarithm is N, and the speed is F (RPM), then the output speed frequency is P=F*N/60. 3. Alarm output ALM signal:There is an 5V alarm pulse output between the port and the ground. 4. Positive inversion function: F/R:Fiddle the toggle switch on the corresponding side, the motor steering direction can be changed. For the toggle switch, the white part is up and down, then twang it up and down. For the toggle switch, the white part is horizontal, and the twang horizontally. 5. Start-stop: 1. External switch EN: Transfer through switch. 2. Side toggle switch EN: for the toggle switch, the white part is up and down, then down for the start; for the toggle switch, the white part is horizontal, then dial to start Note: You only turn one control at same time, one of the switches is closed, and the other one is valid. 6. Locked-rotor protection:If the motor stops working, switch on the power again to start. 7. Status light: Red light: two flashes in standby time, after starting, extinguish. 8. Insulation strength: At normal temperature and pressure, 0.5KV, 1 minutes Package included: 1 x Motor Driver Controller with cable
Hilitand Motor Driver Controller, Brushless DC Motor Driver, Spindle BLDC Motor Drive, CNC Controller Board Module, DC48V-500W WS55-220
$54.99
- 【HIGH PERFORMANCE】WS55-220 is a high performance,cost-effective 3 phase BLDC motor controllerage range is from 20VDC to 50VDC.
- 【CONVENIENT TO USE】The controller can drive the DLDC motor with HALL or without HALL, which can be very convenient and suitable for your using.
- 【OPERATING PRINCIPLE】The driver is based on advanced technology and be provided with high speed, high torque, low noise, low vibration, over current protection, overload protection, less phase line. protection, phase line short protection, alarm output, speed signal output, industrial automation
- 【MULTIPLE APPLICATION】This controller can be used in small equipment, Electric Power Tools, exhaust Fan, Jade grinding machine, Vibrating motor etc.
- 【MAIN FUNCTION】: when the motor stops running, the standby current is automatically reduced to half of the working current, which can reduce the heat of the driver. even DIYers can opt to use it
In stock
Additional information
| Weight | 0.22 kg |
|---|---|
| brand | Hilitand |
| dimensions | |