The delivery is only the actuator. Distance dissipation finds its radio frequency bass: https://www.iluminize.com/de/shop/led-bedienungsanleitungen/anleitungen-led-controller. In order for the product to be used radio, a suitable ‘remote control’ must be purchased from iluminize in addition, unless you are already and other projects. The LED actuator can be linked by radio with up to 8 different remote controls, here is a list: Design wall dimmer r for LEDs, No. 542.111, Product Code: B01BA Wawzy Design Wall Dimmer Touch for LEDs, Product No. 540.141, ASIN: B0173G7 Handheld Quality Mini Remote Control for LEDs, Control Colour Hand distance (N) 530.140, ASIN: B01BB1ZDQ2 MIDI for LEDs, Product No. 531.160, ASIN: B01BIXGN0 Desk LED Dimmer, Product No. 550.110, ASIN: B01BIXFM2I WiFi Bridge, Product No. 560.080, ASIN: B01 BIXJ76U presents the products are also among the photos so that the actuator can be controlled with a remote control, it is necessary that the two devices only be linked. this is very simple: 1-Engrave the drawing of the actuator. After switching on light the lamp connected with power, connect the lamp (N) are about 75% dimming. 2 x remote control (if required). 3 on the remote control Select an area (1 – 6) (if necessary) Button ‘4 Learning on the short actuator, press the remote control to use “The Wars, the lights flash briefly and then are the two devices together. For the creation in the smartphone app, consult the appropriate WiFi distance dissipation (link) the installation of the device must be carried out in Germany by an electric master.
Illuminize High Voltage Sets and Components, Dimm-Aktor 230.00 Volts
$116.99
- Radio/WiFi bridge: now you can also use our LED controls (for LEDs and the regular smartphone app) to the whole light assembly. la – Dimmable ceiling lamp above the dining room, the GU10 from stahler (LED or halogen) or the floor with the bulb. Important: The device is supplied without remote control/WiFi bridge. the device never after consumers distinguishes between triac and operational MOSFETs. the dimmer is performed by bleeding phase.
- Fits in the switch box: thanks to its small dimensions of 45 mm x 45 mm x 45 mm x 21 mm, the mini dimmer switch fits (behind the switch in a can, but can also be mounted in the lamp or ceiling mounted. Tip: behind a plug the plug DIMM Bar/Switch Bar up to 400 W, the mini actuator is simply multilingual, see diagram in the pictures attached.
- Innovative adjust the slight brightness of the screen: the button can adjust the minimum brightness, so you can prevent the connected lamps from flickering if these are dimmed too much.
- Optional on/off switch per push: can be adjusted and switched off also with one or more buttons (multiple locations such as on a switch circuit, suitable for electrical installation as a serial, not included). The voltage range is (for buttons) in 8 – 230 V, so that as good as any push button can be used.
- With regard to the WiFi bridge, you can control it by smartphone: in the use of the WiFi bridge, you can easily control any number of mini dimmakers in up to 8 different light zones (light groups of equal dimming) with the smartphone.
In stock
Additional information
| Weight | 0.04 kg |
|---|---|
| Brand | iluminize |
| EAN | 4260421152924 |