JiePai 16 inch Suction Cup Towel Bar, Vacuum Suction Towel Holder Suction Towel Rack for Bathroom Wall Mount Bath Towel Rail

1，Instructions:Main Materail:ABS plastic materialMaximum load-bearing capacity:15pounds4/5inch Wide that Better support open towelLength: 16inch2，Installation Step①Towel Bar is suitable for smooth and no concave convex smooth surface such as ceramic tile,glass,smooth wood,smooth metal surface,etc.A：Before use, Ensure the surface is flat,smooth and dryr the surface.B：Pressing two holders against the wall,push out the air,continuing to hold in position, slide the two suction levers downward.C：Leave it for 15 minutes before use to ensure the suction cup is fully sucked.②The others non-smooth surface please use 3M adhesive disc first(provided in package)to overcome them, such as rough wood,emulsioni paint,textured tile, etc.A：Before use, clean the wall with a soft cloth.B：After the wall is dry, tear off the protective film of the 3M sticker and place the sticky side of the 3M sticker on the wall so that it sticks to the wall.C: Then take the towel bar,press the suction cup firmly on the 3M adhesive disc and push the transparent lowering button to the locked position.D：Leave it for 15 minutes before use to ensure the suction cup is fully sucked.3，Can be installed anywhere according to your needs，easy to hung up full of water toweler matrag towel etc can be Used as Shower Slide Bar4， Product CharacteristicsTowel Bar is a product with a sealing lip, which forms a temporary sealed space after contacting with the sucked object. It works by sucking or thinning the air in the sealed space to create a pressure difference between the outside and inside. Without drilling holes, it will not damage the wall surface and can be firmly fixed on a smooth surface.5，When the wall surface is not smooth or not cleaned, there will be air leakage after installation for a period of time, and it is forbidden to put fragile items such as glass.