Features: Connector: 2 Terminal Connector with 2pin-ph2.54; Wiring: red wire is connected to positive pole, black wire is connected to negative pole. When Vcc is reversely connected to GND, it does not conduct.(Open circuit when Vcc andamp; GND are exchanged). When Vcc is reversely connected to GND, 5 seconds pull out will not burn the board. Model: 4010 Blower Fan Rated Voltage: DC 12V Operation Voltage: DC7V – 12V Consuming Current: 0.08A+5% Consuming Power: 0.96W Max. Air Flow: 2.8CFM Acoustic Noise: 22dBA Rated Speed: 7200±5%RPM Connector: 2pin-ph2.54 DC Line Length: 300mm Rotation Direction: Clounter-clockwise Iife Expectance: 50,000 hours at 25 degree Size: 40x40x10mm Screw Hole Diameter: 1.5mm Weight: 11.6gPackage Content: 2 x 4010 12V 0.08A Brushless DC Cooling Fan
Jopto 2Pcs Brushless Fan DC 12V Cooling Fan 4010 0.08A 40mm x 40mm x 10mm 3D Printer Fan Hydraulic Turbo Cooling Fan with XH2.54-2P Wire for 3D Printer
$32.99
- Made of high quality ABS material, the fan is very sturdy and durable. 40mm Brushless DC Cooling Fan with 2 Pin connector. With high performance and low noise.
- Rated Voltage: DC 12V, Current: 0.08A; Speed: 7200RPM, Noise: 22dBA; Air Flow: 2.8CFM.
- Bearing Type: Hydraulic Bearing. Dimensions: 40 x 40 x 10mm(1.6 x 1.6 x 0.36inch).
- Connector: 2 Terminal Connector with 2pin-ph2.54; Wiring: red wire is connected to positive pole, black wire is connected to negative pole.
- Polarity Protection: 1. When Vcc is reversely connected to GND, it does not conduct.(Open circuit when Vcc andamp; GND are exchanged) 2. When Vcc is reversely connected to GND, 5 seconds pull out will not burn the board.
In stock
Additional information
Weight | 0.024 kg |
---|---|
brand | Jopto |
dimensions | 4 x 4 x 2.1 cm; 23.2 Grams |