KALEA-INFORMATIQUE Professional RJ45 RJ11 USB BNC network tester: Tests length, maps and locates faults. Version with anti-jamming function

45 and BNC cables (main unit).
Tells you the total length of the cord, or in the event of a breakdown the distance to the original point where the damage to the cable is located.
Maps RJ45 and BNC cables (main unit with its satellite).
Displays the wiring diagram on its screen. You will read if the cord is straight or crossed for example, or you can spot if one of the 8 wires of an RJ45 cord is cut or has a bad contact.
Tracks RJ45 RJ11 BNC USB cables and any metal cable (main unit with its locator).
Connect the end of a cable to the main module. Thanks to the detector, you can then spot this cord among a multitude of others, which can easily intervene on it in case of damage, for example. The detector lights up in front of it and beeps to spot the cord, you can even use the helmet provided to work in silence!
This tester has an anti-jamming function that allows it to work even very close to electronic sources (PC, hub, switch…).
Central Control:
LCD screen large 53 x 25 mm retro-electric,
Tracing signal frequency 225Hz,
Maximum tracing distance 3000 m (electrified cable),
2000 m (non-electrified cable),
Maximum distance for mapping 2500m,
Maximum test distance 1000m,
2 tone tone, adjustable,
Compatible with RJ11, RJ45, BNC, USB,
Mapping On LCD screen,
Shielding indication On LCD screen,
Voltage protection AC 60V/DC 42V.
Low battery display On LCD screen (6.5V),
Works with battery DC9.0V (NEDA 1604/6F22 DC9V) x 1pc.
Dimensions (L x W x D) 185 x 80 x 32 mm.
Locator:
Frequency 225kHz,
Consumption less than 70mA,
Headphone jack 1,
LED 2 LEDs.
Battery type DC9.0V (NEDA 1604/6F22 DC9V) x 1pc.
Dimensions (L x W x D) 218 x 46 x 29 mm.