Keypak 12 inch (30cm) Telescopic Door Letterplate/Letterbox, 40-80mm Door Depth, with Draught Excluder, Suitable for UPVC & Wooden Doors (Black/Polished Silver)

$41.99

  • INTERNAL DRAUGHT EXCLUDER – The integrated brushes help prevent draughts. Plus, an internal water seal prevents water leaks as it stops water getting into the door or panel.
  • ANTI-SNAP FLAP – The flap opens a full 180 degree for easy access and to prevent it from snapping off when opened too far.
  • ADJUSTABLE SLEEVE – The telescopic design means the letter box can be adjusted to fit doors between 40mm to 80mm in thickness. Our letter box will fit most uPVC, Composite & Timber doors.
  • DIMENSIONS – The letter box overall size is 306mm x 70mm and the internal dimension of the sleeve is 254mm x 37mm. The distance between the screw hole centres is 275mm.
  • EASY TO INSTALL – Please read product description below for a simple guide on how to install the letterbox.

In stock

— OR  —

— OR  —

  • International Express shipping available
  • 30 day easy returns
Guaranteed Safe Checkout

The 12-inch Telescopic Post Port Letterplate with adjustable telescopic sleeves fits doors 40 to 80mm. The letterplate includes an insulating brush strip that reduces cold & draughts and the flap opens to 180° for easy posting. It’s fitted with sound dampening bumpers to prevent slamming. Fitting Instructions 1) Cut door aperture 285mm X 50mm 2) Separate the two letterplate halves and place the exterior gasket over metal fixing posts. 3) Take the half that contains brushes and insert into the aperture from the inside of the door. 4) Take the exterior half (with gasket) and slide into the letterplate tube from the outside of the door. 5) Before fixing. Take time to ensure the letterplate fully covers the aperture on both sides and that the exterior gasket does not protrude. 6) Use either the 2 short OR 2 long bolts (depending on your door thickness) and screw into centre hole at either end of the letterplate, ensuring that you DO NOT TO OVER TIGHTEN fixings of Finishes: Regular cleaning, using warm soapy water and a non-abrasive cloth should be sufficient to keep any finish in its original condition for a long period. For Anodised finishes, an occasional wipe over with a damped cloth containing a good light oil or lanolin is recommended.

Additional information

Weight 0.47 kg
brand

keypak

dimensions

‎6.7 x 30.6 x 7 cm; 484 Grams