Specifications:
Material: Plastic
Color: Black
Input Voltage: 12V
Power: 12W-24W Adjustable
Temperature: Maximum Temperature 70℃, Minimum Temperature 50℃
Length: 123mm/4.8″
Hole Diameter: 22mm/0.87″
Package Weight: approx. 250g
Fitment: Fit for most 12V motorcycle with 22mm(7/8″) diameter handlebar
How To Use:
[1] Remove the original handlebar
[2] Wet the inner hole of the left handlebar with soapy water, and the twisting amplitude should not be too large during installation
[3] When installing the balance iron on the left handlebar, adjust the position of the balance iron to be slightly separated from the handlebar, and do not squeeze the handlebar when tightening the screw
[4] In use, if the left handlebar slides on a steel pipe, remove the balance iron, and fix it with a few drops of glue from the end of the handlebar
[5] Power cord, the red wire is connected to the positive pole, and the black wire is connected to the negative pole (not reversed)
[6] When installing the left handlebar, the power cord should be left enough for rotation
Package Included:
1 x Pair of Motorcycle Handlebar
Notes:
1. Please note that the temperature can not be adjusted if the wire connected wrong.
2. Please allow 1-3mm error due to manual measurement. Thanks for your understanding.
3. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
4. When installing the left handlebar, do not twist the handlebar too much. Excessive twisting will cause the heating wire to shift.
5. For models with balance iron, please adjust the installation position of the balance iron.
6. Do not squeeze the handlebar when tightening the screws, the balance ir