?Lanhiem?
Waterproof case for Apple Watch suitable for band 40 mm Series 4 and Series 5.
?Specification:
1. The waterproof case for Apple Watch is fully compatible with the 40mm Apple Watch Series 4 and Series 5.
2. Helps protect your 40mm Apple Watch case from scratches and bumps.
3,360 ° all-round protection, waterproof and shockproof.
4. Waterproof silicone sealing ribs, 2-3 meters IP68 penetration protection.
5. Receives access to sensors and tactile control.
6. Material: TPU + PC + PE
?Water test:
1. Remove the case from the packaging and check that the case has no damage or scratches.
2. Unscrew the lock button on the cover and remove the bottom cover.
3. Open the housing and check that the grommet seal is clean and undamaged.
4. Clamp the upper and lower parts by pressing on each side of the sleeve.
5. Using a heavy object, immerse the case under 20 cm of water for 20 minutes and check that there are no bubbles on the surface.
6. After 20 minutes, remove the cover from the water, open it and check if the inside is dry.
?Assembly Instructions:
1. Thoroughly clean the entire cover with a clean cloth.
2. Unscrew the locking button on the housing and remove the lower cover.
3. Open the housing and check that the grommet seal is clean and undamaged.
4. Place the watch in the protective case.
5. Close the cover completely.
6. Check the edges to make sure the case is closed and test the buttons (power, volume). The installation is complete.
?What’s in the Package:
1 x waterproof watchstrap and case for Apple Watch 40 mm.
2 x replacement watchstrap
1 x User manual
1 x Tool kit
?Warranty Policy:
Lanhiem Support Team will respond to your request within 24 hours! Lifetime warranty!