e control key fobs, button slide cover, handy key chain size, this is a fixed frequency remote cloner for copying common fixed and learning code.
Specifications:
Material: Plastic
Color: Black & Silver
Operating Frequency: 433(433.92)MHz
Rated Voltage: 12V
Cell: 10 x CR2016 (included)
Package Weight: 255g / 8.99ounces
Package Size: 150 * 50 * 50mm / 5.91 * 1.97 * 1.97in
How to Copy:
Because the fob has code when it was produced, so you need to reset it before copying.
Reset:
Hold buttons A and B down simultaneously, once the LED is flashing continuously, release both buttons to complete the reset.(If your remote hasn’t have button A or B, just press the top two buttons)
Copy:
Place the old and new remotes side by side and press and hold the button on the remote you want to copy while pressing and holding the corresponding button on the new key fob (A, B, C, D, etc.).
The process will be complete with the fob light flashes.
Tips:
If you reset the code that you had copied and want to recover, press buttons C and D (or the bottom two buttons) until light flashing.
Notice:
If done correctly, can use directly. If not, or individual button not useful, please turn to clean and copy again, notice the change of light during operation. If problems still exist after attempting several times, check the chip and frequency of remote control again, and contact us.
Packing List:
10 * Remote Control Key Fobs