Pro-Line Engine Flush is a development product based on highly effective state-of-the-art additive technology. These highly effective detergent and dispersant additives in association with the carrier fluid have been tested in the laboratory and in practical field trials for their ability to dissolve sludge and lacquer formers. All types of oil-soluble and oil-insoluble residues are brought into suspension and removed during the next oil change. An engine which has been cleaned of deposits and contamination and which is then filled with fresh oil not contaminated with old impurities can develop its full performance characteristics.
Liqui Moly Pro-Line Engine Flush
$60.99
- Cleans the engine from the inside. Removes deposits from lubrication holes, oil screens, piston ring zone, etc. Reduces engine noise and oil consumption. Improves compression. Increases vehicle’s reliability.
- Cleaning and flushing out the oil systems of petrol and diesel engines.
- One 500 ml can is sufficient for up to 5 litres of oil. Add Pro-Line Engine Flush to the engine oil at running temperature before changing the oil. After adding the product, allow the engine to idle for approx.
- 10 to 15 minutes depending on the degree of contamination. Then change the oil and the filter. Pro-Line Engine Flush is compatible with all commercially available engine oils Note: Not suitable for use on motorbikes with wet clutches.
In stock
Additional information
| Weight | 0.93 kg |
|---|---|
| brand | Liqui Moly |
| mpn | 2425 |
| dimensions | 23 x 15.4 x 19.4 cm |