Additional information
| Weight | 0.88 kg |
|---|---|
| brand | LYONGTECH |
| dimensions | 25.1 x 19.7 x 6.7 cm; 712.14 Grams |
LYONGTECH Battery Wall Charger & Car Charger for DJI Mavic 2 Pro/Zoom and Remote Controller,5 in 1 Rapid Charging Hub with Charging, Discharging and Storage
$178.99
- [Multifunctional] The charger comes with AC power adapter and DC charger adapter, you can charge your batteries at home or in your car. Special designed for DJI Mavic 2 Pro & Zoom Battery and remote controller. Not for Mavic Pro,Mavic Pro Platinum,Mavic Air and Mavic Air 2
- [Fast Charging] Support 4 batteries and remote control parallel charging. Automatically adjust charging current, it take about 80-100 minutes full charging all 4 batteries by AC power adapter:Charge 4 batteries at a time;The charging current of the 4 ports is different, and the current of each port changes in real time;When charging 4 batteries, CH4 port will initially charge at very low current the current of other ports becomes smaller, the current of this port will become larger
- [Battery Safety Storage] When the battery is ready to stored for a long time, it is necessary to keep the power at about 40%-60%. Full power and low power storage will cause battery damage. In the storage mode, this charger can make the battery’s power at around 40%-60%, and the battery storage is safer:Batteries with more than 15.4-15.8v will be discharged to 15.4-15.8V,meanwhile batteries with less than 15.4-15.8v will be charged to 15.4-15.8v
- [Discharge Maintenance Battery]After 20 cycles of Mavic 2 battery use,it is suggested that the battery should be completely emptied and then charged to 60%, which can extend the service life. This discharge function can completely empty the battery to 0%
- Input: AC 110-240V or DC 11-14V, Output: 17.6V/3.0A(Max)x 4 ,USB output:5V 2A; Output total power:105W(Max),Discharge power:30W(Max）Built-in Intelligent safety charging protection chips. With digital display, it shows the battery charging status, current and voltage
In stock