Magnetic Circuit Clamp Board Holder, Board Holder Magnifier Fine Workmanship for Motherboard Repairing Use

Feature:1. The bottom plate is treated with high‑quality plastic spraying, and the fixed column is all two‑color electrochemical treatment.2. The fixed column red and blue are attracted to each other, so the combination of red and blue columns will be better when fixing the small board.3. The electrified column is insulated and can be clamped for online debugging or maintenance of the PCB, but it should still not be in contact with solder joints or lines as much as possible.4. Fine workmanship, polishing and effective protection of the motherboard from damage, suitable for any thickness between 0.2‑2MM/0.008‑0.08in.5. Be careful not to blow the column directly with the hot gun, the neodymium iron boron magnet is easy to fail under high temperatureification:Conditon: 100% Brand NewItem Type: Magnetic PCB HolderMaterial: Steel/Acrylic Optical Lens/MagnetColor: As Pictures ShownModel: TE-804Workbench Size: Approx. 210 x 145 x 12mm/8.3 x 5.7 x 0.5inMirror Diameter: Approx. 62mm/2.4inMagnification: x3Application: Suitable for any board with thickness between 0.2‑2MM/0.008‑0.08in: When using the attached small board fixing screw, pay attention to the direction of the gasket. Using the blade surface of the gasket to clamp a small PCB will make it more stable!Package List:1 x Workbench2 x Spring Clip1 x Magnifier4 x Fixed ColumnNote:1. Magnets are easy to lose magnetism at high temperatures, please be careful to avoid continuous heating of the magnets to cause high temperatures2. The magnet has strong magnetism, please keep away from the magnetic card.3. When using the attached small board