Specification: Condiiton: 100% Brand New Color: As picture shown Material: Steel Measuring range: 1.5 (mm) Measurement accuracy: 99% Size: (L) x (W) x (H) 5 x 5 x 13cm / 1.97″ x 1.97″ x 5.12″(appr.)Instructions for use: 1. Remove the four-wheel positioning sensor (fixture), remove the tire. 2. The magnetic level to carefully suck in the brake wheel on the side. 3. The level of adjustment to zero. 4. Installed on the required positioning of special parts. 5. The use of special tools, with the degree of magnetic level instructions, adjust the positioning of parts to the required measurement angle. 6. With a locator re-test if found to have a little deviation, just fine at the bottom of the car can be. (Generally a little deviation does not cause positioning failure)age Included: 1 x Magnetic Gauge ToolNotice: Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering. Please understand that colors may exist chromatic aberration as the different placement of pictures.
Magnetic Gauge Tool, Universal Adjustable Car Magnetic Gauge Tool Truck Camber Castor Strut Wheel Hub Alignment
$54.99
- 【Use to】Magnetic gauge attaches to the hub or disc brakeures the camber and caster angle on the wheel hub or brake disc helped adjust the camber is a useful DIY tool but you should have your car professionally aligned.
- 【Use to】Magnetic gauge attaches to the hub or disc brakeures the camber and caster angle on the wheel hub or brake disc helped adjust the camber is a useful DIY tool but you should have your car professionally aligned.
- 【Convenient to operate】Adjustable Magnetic Gauge Tool,Has a simple leveling adjustment from -5 degrees to 5 degrees to read and convenient to operate this simple level to restore a vehicle’s camber setting after strut repair or installation.
- 【TIP】Universal Gauge Tool,This tool is used to set camber back to the same place it was after you remove or replace a strut is used to make a camber adjustment by moving the strut in or out slightly and tightening the bolts back up. Camber is how much the top of the tire tilts in or out and is measured in degrees. When camber is changed it also changes toe.
- 【High strength】Universal Magnetic Gauge Tool,Made of steel material, high strength plasticity, good toughness, high safety and reliability using this tool make sure that the magnet is not retained on the rotor.
- 【Note】As a reliable seller, we aim to provide 100% products and services, and hope you have a pleasant shopping experience in our store.
In stock
Additional information
| Weight | 0.28 kg |
|---|---|
| brand | Elerose |
| dimensions | 13 x 5 x 5 cm; 280 Grams |