Magnetic Gauge Tool Universal Adjustable Car Truck Camber Castor Strut Wheel Hub Alignment

Features:High-quality materials: Made of steel, high strength plasticity, good toughness, high safety and reliability. Main function: measure camber and camber on the wheel or brake disc. Adjustable: Simple level adjustment from -5 to 5 degrees. Convenient: Easy to read and easy to operate. Note: The magnetometer is connected to the hub or disc brake. Use this simple level to restore the camber setting of a vehicle after pillar repair or installationification: Condiiton: 100% Brand New Color: As picture shown Material: Steel    Measuring range: 1.5 (mm) Measurement accuracy: 99% Size: (L) x (W) x (H) 5 x 5 x 13cm / 1.97″ x 1.97″ x 5.12″(appr.)Instructions for use: 1. Remove the four-wheel positioning sensor (fixture), remove the tire. 2. The magnetic level to carefully suck in the brake wheel on the side. 3. The level of adjustment to zero. 4. Installed on the required positioning of special parts. 5. The use of special tools, with the degree of magnetic level instructions, adjust the positioning of parts to the required measurement angle. 6. With a locator re-test if found to have a little deviation, just fine at the bottom of the car can be. (Generally a little deviation does not cause positioning failure)age Included: 1 x  Magnetic Gauge ToolNotice:Please allow 1-3cm error due to manual measurement and make sure you do not mind before orderingse understand that colors may exist chromatic aberration as the different placement of pictures.