Specification:
Item Type: Capsule Filler
Product Material: Plastic
Color: As Pictures Shown
Options: 0#, 1#
Holes Quantity: 100
Package Size: Approx. 18 * 18 * 6.5cm / 7.1 * 7.1 * 2.6inch
Package Included:
1 x Alignment Plate
1 x Body Plate
1 x Middle Plate
1 x Cap Plate
1 x Powder Pressing Plate
1 x Powder Spreader
1 x Handle
Operational Steps:
1. Load the capsule body, put the body plate in flat.
2. Put the frame of the arrangement plate on the body plate.
3. Put about 100 capsules in the frame.
4. Pick up the plate body and arranged wheel swinging around.
5. Capsule body will fall into the plate hole one by one, then pour the extra capsule body out.
6. Take the wheel arrangement plate, put the capsule body installed on the board aside.
7. Filling power in the capsule body.
8. Scrape the board back and forth on the body, when the capsule body is full on powder.
9. Use powder pressing plate filling capsules plate, filling capsules.
10. Scraping plate excess powder.
11. Turned over the the cap plate and middle plate to cover the body plate.
12. Lock the capsule body and the capsule cap.
13. Remove the cap plate.
14. Remove the middle plate, pour out the capsule from the locking middle plate.