Manual Capsules Filler Machine Plastic Capsule Filling Tool with Spreader 100 Holes for Hospital Clinic Laboratory and Home Use(With Powder Block Plate)

Specification: Condition: 100% Brand New Item Type: Capsule Filler Material: Plastic Color: Blue Holes Quantity: 100 Suitable for Capsule Type: 00# Optional Type: With Powder Block Plate, Without Powder Block Plate Size: Approx. 16.5 x 16.5cm / 6.5 x 6.5inch Weight: Approx. 786-842gPackage Included: 1 x Alignment Plate 1 x Body Plate 1 x Middle Plate 1 x Cap Plate 1 x Powder Pressing Plate 1 x Power Spreader 1 x Powder Block Plate or 1 x Alignment Plate 1 x Body Plate 1 x Middle Plate 1 x Cap Plate 1 x Powder Pressing Plate 1 x Power SpreaderOperational Steps: 1. Load the capsule body, put the body plate in flat. 2. Put the frame of the arrangement plate on the body plate. 3. Put about capsules in the frame. 4. Pick up the plate body and arranged wheel swinging around. 5. Capsule body will fall into the plate hole one by one, then pour the extra capsule body out. 6. Take the wheel arrangement plate, put the capsule body installed on the board aside. 7. Scrape the board back and forth on the body, when the capsule body is full on powder. 8. Use powder pressing plate filling capsules plate, filling capsules. 9. Scraping plate excess powder. 10. Turned over the the cap plate and middle plate to cover the body plate. 11. Lock the capsule body and the capsule cap. 12. Remove the cap plate. 13. Remove the middle plate, pour out the capsule from the locking middle plate.