Specification: Item Type: Thermocouple Module Material: PCB Purpose: Detect the temperature difference between the hot and cold ends Measuring Temperature Range: -200℃ – +1350℃ Interface Type: Adopt for SPI interface, high-speed transmission Working Voltage: 3-5VDC Resolution: 14-bit resolution Accuracy: 0.25℃ Package List: 1 x Thermocouple Module 1 x Terminal 1 x Pin Header
MAX31865 Temperature Thermocouple Sensor, Temperature Detector Module ‑200℃ to +1350℃ Measuring
$27.99
- Measurement temperature range — Adopt for SPI interface, high‑speed transmission. The measuring temperature range is ‑200℃ ‑ +1350℃, 0.25℃ high accuracy, reliable use.
- High‑quality amplifier — The MAX6675 has a signal conditioning amplifier that converts the thermocouple signal into a voltage compatible with the ADC input channel. The T and T- inputs are connected to the low noise amplifier A1 to ensure high accuracy of the sense input while allowing the thermocouple to connect wires and sources of interference. isolation.
- Easy to use — MAX6675 K type thermocouple temp sensor used to detect the temperature difference between the hot and cold ends, suitable for experiments, electronic product design and DIY, etc.
- K type — The MAX6675 is a complex monolithic thermocouple digitizer with a signal conditioning amplifier, 12-bit analog/digital thermocouple converter, cold junction compensation sensing and correction, digital controller, 1 SPI compatible interface and 1 Related logic control.
- 3-5V DC Working Voltage – The distributor plate has a chip, and a 3.3V regulator with a 10uF bypass capacitor and a level conversion circuit. Comes with a 2‑pin terminal block (for connecting to a thermocouple) and a header (for inserting any breadboard or perforated board).
In stock
Additional information
Weight | 0.01 kg |
---|---|
brand | VGEBY |
dimensions | 4 x 3 x 1 cm; 40 Grams |